Material Safety Data Sheet (MSDS) |
PETROLEUM PRODUCTS of AMERICA
U.S. PATENT NUMBER 5520882 issued on May 28, 1996
SECTION I - PRODUCT IDENTIFICATION
1. Manufacturer for
STERI-LUBE INTERNATIONAL, LTD. |
= |
Petroleum Products of America |
| 2. Name |
= |
STERI-LUBE® |
| 3. Formula |
= |
A mix of liquid hydrocarbons refined from petroleum |
| 4. Product use |
= |
Lubrication |
| 5. Toxicity |
= |
Not a controlled product |
| 6. Transportation |
= |
DOT Hazard Class - Not Regulated |
| 7. Note |
= |
Not less than 90% of this formulation
is fully refined white mineral oil meeting the requirements
of the United States Pharmacopeia XXII as well as the requirements
of the Food and Drug Administration per CFR 172.878. Not
more than 10% this formulation is a fully refined light amber
oil, mineral based, as added lubricant enhancer and corrosion
inhibitor, also complying to the same basic physical specifications
as well as MSDS specifications. |
|
|
SECTION II - PHYSICAL DATA
1. Physical State |
= |
Liquid |
| 2. Color/Odor |
= |
Clear - Pleasant, nutty odor |
| 3. Specific Gravity |
= |
< 1.0 @ 15 deg. C. |
| 4. Vapor Pressure |
= |
< .5mm |
| 5. Evaporation Rate |
= |
Nil @ 25 deg. C. |
| 6. Boiling Point |
= |
> 230 deg. F. |
| 7. Pour Point |
= |
> -9 deg. C. |
| 8. Flash Point |
= |
> 193 deg. C. > 380 deg. F. |
| 9. Sol. in Water |
= |
Nil |
| 10. pH |
= |
N/A |
| 11. Viscosity |
= |
100 (SUS) |
SECTION III - FIRE AND EXPLOSION DATA
| 1. Flammability |
= |
LOW HAZARD. Product is non-flammable at ambien temperature, liquid
may burn only at temperatures near the boiling point and only if exposed
to an open flame. |
| 2. Extinguishing Agents |
= |
Dry chemical, CO2, Water Spray, Foam, Water Fog, Sand Earth |
SECTION IV - REACTIVITY DATA
| 1. Chemical Stability |
= |
Stable |
| 2. Incompatability |
= |
Avoid contact with oxidizing agents |
| 3. Reactivity |
= |
Nil |
SECTION V - TOXICOLOGICAL PROPERTIES
| 1. LD50 ORAL |
= |
998,000 mg/kg calculated |
| 2. LD50 DERMAL |
= |
1,000,000 mg/kg calculated |
| 3. Route of Entry: |
|
|
| a) Skin contact |
|
No entry into body
through skin. Prolonged contact may cause
mild irritation. No permanent injury. |
| b) Eye contact |
|
Slight irritation to eyes but will not
injure eye tissue. |
| c) Inhalation |
|
No inhalation dangers at room temperatures
as there are no vapors. |
| d) Ingestion |
|
No significant hazard. Minimal Toxicity. Ingestion
of large amounts may cause intestinal obstruction. Ingestion
into lungs may cause chemical bronchopneumonia or pulmonary edema. |
| e) Carcinogenicity |
|
None |
SECTION VI - HEALTH HAZARD DATA
| 1. Permissible concentration (air): |
|
5 mg/m3 for mineral oil mist, Re:OSHA |
| 2. a) EYES: |
|
Flush with water. If irritation continues consult physician. |
| b) Skin: |
|
N/A |
| c) Inhalation: |
|
N/A |
| d) If swallowed: |
|
Call physician, do not induce vomiting. |
SECTION VII - LEAKS OR SPILLS
| Shut off leak, remove all sources of ignition, and soak up with absorbent
material and dispose of in accordance with Federal, State, and local
regulations. |
SECTION VIII - PREPARATION OF MATERIAL
| Signature: (on file) |
|
| |
KEN BROWN |
We believe the statements, technical information and recommendations contained
herein are reliable, however, they are given without warranty or guarantee
of any kind, express or implied, and we assume no responsibility for any
loss, damage, or expense, direct or consequential arising out of their use. |
|
